Taiden HCS-4100/50 Series, Инструкция по установке и эксплуатации, Страница: 166 / 223

152
3.11.4.2 Chairman unit
The chairman unit features all the functions of a
delegate unit, and the following additional functions:
A. Voting without PC
HCS-4368/50 series chairman unit can originate voting
without a PC:
a. In the initial interface of the chairman unit, press
“Vote” (key “3”) to go to the voting control interface
as in the following figure:
b. If “Yes” (key “1”) is selected, the voting results will be
displayed on the LCDs of all congress units; if “No”
(key “3”) is selected, the voting results will be
displayed only on the LCD of the chairman unit. After
selection, the sign-in indicating light of all congress
units will blink. The delegates can press key “1” to
sign-in. After sign-in, the voting indicating lights will
blink, the delegate is now enabled to vote;
c. Only 3 keys voting can be executed in case of a
chairman unit originated voting (“Yes/No/Abstain”)
and only “Last key-press valid” is available. The
chairman can pause/end the voting:
d. The chairman presses “End” (key “5”) to finish voting.
The voting indicating light of all congress units will be
deactivated. The voting results and sign-in statistics
will be displayed on the chairman unit:
B. Voting with PC
ƒ When controlled by the application software,
nominative or ballot voting are available;
ƒ “First key-press valid” or “Last key-press valid” are
available;
ƒ Voting can be controlled by application software.
The voting operation of the chairman unit and the
delegate unit are identical. In this mode, voting can
also be controlled by the chairman unit. “Start
voting” indicating light on the chairman unit will
blink. Voting starts once the chairman pressed the
“Start” key.