Taiden HCS-4100/50 Series, Инструкция по установке и эксплуатации

Страница: 136 / 223

123
B. “Override” mode
■ Active microphone number limitation (1/2/3/4) NOT
reached :
a. The microphone will be activated when the
microphone On/Off key is pressed, the speaker
can give his/her speech;
b. The microphone will be deactivated when the
microphone On/Off key is pressed again.
Active microphone number limitation (1/2/3/4)
reached :
If the microphone On/Off key is pressed, its
microphone will be activated and the first activated
microphone will be deactivated at the same time to
maintain the active microphone number limitation.
C. “Voice” mode
Active microphone number limitation (1/2/3/4) NOT
reached :
a. The microphone On/Off key indicating light
remains on. When the delegate speaks into the
microphone at a short distance, the microphone
will be activated;
b. If the delegate does not speak for several
seconds, the microphone will be deactivated
automatically. The interval time can be adjusted
at the main unit (refer to section 2.4);
c. When the microphone is activated, it can be
turned off by pressing the microphone On/Off
key.
Active microphone number limitation (1/2/3/4)
reached :
All other microphones cannot be activated unless
one of the active microphones is turned off.
D. “Apply” mode
a. Press the microphone On/Off key to request to
speak, the chairman unit can approve or reject
his/her request;
b. When his/her request is approved, the microphone
is activated, he/she can speak. In stand-alone
mode, only one delegate is enabled to request; in
combination with application software, the request
amount can be set via the application software;
c. When the active microphone number limitation is
reached, none other delegate can request unless
one of the active microphones is switched off.
E. “PTT” mode
Active microphone number limitation (1/2/3/4) NOT
reached:
a. The microphone will be activated when the
microphone On/Off key is pressed, the speaker
can give his/her speech;
b. The microphone will be deactivated when the
microphone On/Off key is pressed again.
Active microphone number limitation (1/2/3/4)
reached :
Pressing the microphone On/Off key cannot
activate the microphone until one of the activated
microphones is switched off.
Speaking mode as well as active microphone number
limitation can be configured at the main unit. The
chairman unit and the VIP unit do not count in the
active microphone number limitation. At most 6
microphones can be activated at the same time in a
system. VIP units can be assigned by application
software - at most 32 VIP units.
A camera can focus an activated microphone
automatically (camera position preset by application
software). Speaker’s video can be exported to and
displayed on large screen(s).
4. Voting (only for HCS-4326/50 series)
Voting can be originated by HCS-4100/50 application
software.
ƒ The voting button indicating lights of the congress
unit start to blink, the delegate can press the voting
button to vote;
ƒ For “First key-press valid” voting, the delegate can
vote only once, and his/her voting indicating lights
will be deactivated after his/her voting;
ƒ For “Last key-press valid” voting, the delegate can
change his/her vote. When the delegate voted, the
indicating light of his voted key will be activated
and all other indicating lights will be deactivated.
About 1 second later, all indicating lights will blink