Svedala-Demag DF 115 C, Руководство по эксплуатации

Страница: 27 / 178

B 15
B DF
1
15/
135C.
G
B 1
5
-1
8 -
0
2
-0
1
.03
6 Identification points for signs
Safety information on gas system
1. Fix the gas cylinders in the holders provided and se-
cure to prevent them falling and twisting.
2. Do not extract gas without using hose protection and
gas regulator.
3. Gas cylinders, valves and fittings must be inspected for
leaks every two years by an
expert .
4. Leaks must be reported immediately to the supervi-
sor . For locating leaks, suitable foaming agents must
be used.
5. In case of leaks, prior to working breaks, on completion
of work, with extinguishing of the burner and in case of
fires, the cylinder valves must be closed immediately.
6. To be observed when igniting the burner.
1. Open cylinder valves and main shut-off valve.
Press hose protection for several seconds.
2. Turn ignition key and switch on power supply with
separate switch.
3. Troubleshooting should be carried out only by the
supervisor .
Observe operating instructions.
7. Only use original SVEDALA DEMAG gas hoses with
mark of conformity DIN-DVGW 29.02e588
Hydraulic oil
HE 46
FLiquefied petroleum gas system
Year of manufacture:
Propane Propane
Inlet pressure 1.5 bar
Connected load per burner 1.5 kg/h
Signs must be legible at all times. Damaged or illegible signs
must be renewed immediately.
DIESEL
Attention: It is forbidden
to stand in the operating
area of the hopper.
7
3
4
9
2
5
6
8
4
7
3
6
1
2
5
9
8
Immediately close safety valve
- with extinguishing of the burner
- in case of fires
On completion of work, additionally close gas cylinder valve.
Schildhyst.tif
GEHOR.EPS
Df_115_c.tif
1
Typdf2ce.jpg