Svedala-Demag DF 115 C, Руководство по эксплуатации

Страница: 163 / 178

F 25
F
F
_
DF1
15_13
5C_G
B.
fm
. 25-
40 -
02-
01.
03
Conveyor drive transmission (3.2)
- To check the oil level, unscrew check
screw (1).
With the correct oil level, the oil is just
below the bottom edge of the check hole
or only a small amount of oil discharg-
es from the opening.
To fill oil:
- Unscrew filling screw (1).
- Pour prescribed oil into the filling hole
at (1) until the oil is just below the bottom edge of the filling hole.
- Retighten filling screw (1).
To change oil :
- Turn conveyor drive transmission so that the „oil max” mark is horizontal and drain
screw (2) is located at the bottom.
- Unscrew drain screw (2) and filling screw (1) and drain oil.
Before filling with new oil, the gear must be cleaned using rinse oil.
- Check gaskets of both screws and replace if necessary.
- Tighten drain screw (2).
- Fill new oil into the filling hole until the ”oil max” mark is reached.
- Tighten filling screw (1)
Idler wheel (3.3)
The idler wheel has a lifelong oil fill.
Turas_ol2.tif
1
2