Svedala-Demag DF 115 C, Руководство по эксплуатации

Страница: 105 / 178

D 65
D
D_DF1
1
5_135C_
G
B
.f
m
. 65-
92 -
02-
01.
0
3
When the hydraulic oil is cold:
- Set the conveyor switch (32) to „manual”
and the auger switch (24) to „auto“.
- The remote control has to be connect-
ed and the same function have to be
set to „auto“
- Set the drive lever (9) to position 1
- Press button (21) to increase the en-
gine speed, the conveyor and the au-
ger start operating.
- Let the hydraulics warm up until the in-
dicator lamp goes out.
The lamp goes out when the pressure
drops below 2.8 bar = 40 psi.
For further possible malfunctions, refer
to section 4.
Battery charge indicator (47)
Must go out after starting when the en-
gine revs up.
$
Briefly rev up the engine when the lamp
does not go out or lights up during operation.
Switch off the engine and determine the
cause for the malfunction if the lamp does not go out.
For further possible malfunctions, refer to the section „Malfunctions”.
Element1_SPSC.cdr,Element2_SPSC.cdr
9
21
24
32
Kontrollleucht_SPSC.cdr
47