Svedala-Demag DF 115 C, Руководство по эксплуатации

Страница: 101 / 178

D 61
D
D_DF1
1
5_135C_
G
B
.f
m
. 61-
92 -
02-
01.
0
3
3.2 Starting the paver finisher
Before starting the paver finisher
Before starting the diesel engine and beginning operation, the following steps must
be performed:
- Daily maintenance of the paver finisher (see chapter F)
$
Check the operating hour counter to determine whether or not additional mainte-
nance work (such as monthly or yearly maintenance) must be performed.
- Check the safety devices and protective devices.
„Normal” starting
Set the drive lever (9) to the center position
and the speed adjuster (10) to minimum.
- Insert the ignition key (5) in position
„0”. The lights should be switched off
during starting to reduce the current
drain on the battery.
Starting is not possible when the drive
lever is not in the center position or when
an emergency stop button (7) or (54
&
)
on the remote control unit has been
pressed („STOP“ in the LC-display).
- Press the starter button (11) to start the engine. Do not let the starter run perma-
nently for more than 20 seconds; allow for a break of 1 minute after every attempt!
10
9
7
5
11
Element2_SPSC.cdr