Svedala-Demag DF 115 C, Руководство по эксплуатации

Страница: 47 / 178

D 7
D D_DF1
1
5_135C_
G
B
.f
m
.
7-
9
2
-
0
2
-0
1.
03
Item Designation Brief description
9
Drive lever
(forward - reverse)
For switching on the paver finisher functions and for continu-
ously regulating the traction speed – forward or reverse.
Zero position: starting is possible; engine at idling speed; no
traction drive
Depending on the position of the drive lever, the following
functions can be activated:
- Position 1: Conveyor and auger on.
- Position 2: Screed motion (tamper/vibration) on; traction
drive on; increase speed until the stop is
reached.
Use the preselector to set the maximum speed.
10
Preselector, trac-
tion drive
For setting the maximum speed that can be reached when the
drive lever is at its stop.
The scale roughly matches the speed in m/min (during
paving).
11 Starter
Starting is only possible when the driver lever is in the neutral
position. All emergency stop buttons (on the operating panel
and the remote controls) must be pulled out.
12
Straight-ahead
travel synchroniza-
tion
Additional function for machines without synchronization or
when sensors in the caterpillar drives are defective.
Using this potentiometer, both chains can be synchronized for
straight-ahead travel while driving:
- Set the steering wheel to position „0”; then adjust the
potentiometer until the finisher is travelling straight ahead.