Svantek SV 106A Скачать руководство пользователя страница 64

Страница: 64 / 92

SV106A User Manual

7.3 Managing the setup files

– Setup Manager

The

Setup Manager

is used for checking

the contents of the memory and operating
on  Setup  files  such  as:  open,  delete,
rename files,  create  new files  and  display
file information.

In the

Setup Manager

window, only setup

files are displayed. Setup files have

extension

SVN

and icon attribute

<ENT>

Note: The setup files are stored in the predefined SETUP catalogue. Setup Manger always opens
it after pressing <ENTER> and it is not possible to change this catalogue from Setup Manager
window.

7.3.1 Saving the setup files

There are two options to open the

Setup Manager

window.

One option is to press

<S/P>

push-button

when a measurement is not being
performed.

Another

option

open

the

Setup Manager

position from the

File

menu.

<S/P>

To save the setup file, the user should
enter the catalogue in which the new file
will be created and press the

<ENTER>

push-button at the

<New File>

position.

Save Setup

window is then opened.

<ENT>

There are two available functions: saving
a setup file with the name number
increased by one

(

Auto Name: Number

)

or saving a setup file with the edited name

(

Auto Name: Off



7.3.2 Commands on the setup files

The

Setup Manager

enables the user to

perform commands on the setup files in the
same way as it was described above for the

File Manager

position. To perform any of

the

commands

like:

Load

Add to start menu

Rename

Info

and

Delete

the user should choose the file for

which this command will be applied and
press the

<ENTER>

push-button. The list of

commands will open then.

<ENT>

Содержание SV 106A




























































































Результаты поиска

Содержание SV 106A

Отзывы:

Похожие инструкции для SV 106A

Бренды по названию

Популярные бренды

Svantek SV 106A, Руководство пользователя

Результаты поиска

Содержание SV 106A

Отзывы:

Похожие инструкции для SV 106A

Бренды по названию

Популярные бренды