22
SV106A User Manual
3.6. Files downloading and uploading
Downloading files
All files stored in the memory (micro SD Card) can be downloaded to the PC. There are two ways to download
files.
First way is to extract the micro SD Card and use it directly in the PC.
Second way is to use + or Supervisor software, which enables the user download and upload
functions as well as data view and data processing options. In this case the instrument should be connected
to the PC via SC 56 USB cable.
Note: Description of + and Supervisor
is given in the “+ User Manual” and
“Supervisor User Manual”.
Uploading files
Same approach is used for uploading files (usually setup files).
Files can be upload via micro SD Card or via + or Supervisor software.
3.7.
Activation of the optional functions
Standard instrument firmware contains all basic functions to perform measurements in accordance with most
international standards and methods. For more complex tasks the user has the possibility of expanding the
basic functions of the instrument with additional functions. These features include 1/1 and 1/3 octave analyser,
signal recording and others.
If additional functions were not supplied in the instrument kit and were not unblocked by supplier, such a task
is in responsibility of the user who decides to buy additional functions later.
The optional function is activated when the
user is trying to use it for the first time. For
example, if time signal recording (Wave or
Event) was blocked, but the user
purchased this option later, then during the
first attempt to switch it on, the instrument
requires entering the special code that will
unlock this function. Once unlocked option
will run permanently.
<ENT>
Pressing
<Shift>
and ◄ right after turning on the instrument enables the
user to check and to lock back early unlocked options.
