18
SV106A User Manual
“computer”
icon is displayed
when
there
is a successful USB connection with the
PC.
“Trigger Level +”
icon is displayed when the
trigger condition is set up to “
Level+
”. The icon
appears alternately with the “play” icon.
“curve”
icon is presented when the
current measurement results are logged
into the instrument’s logger file.
“Trigger Level –“
icon is displayed when the
trigger condition is set up to “
Level-
”.
“arrow up”
icon is displayed when
overload appears.
“Trigger Slope +”
icon is displayed when the
trigger condition is set up to “
Slope+
”.
“arrow down”
icon is displayed when
under-range appears.
“Trigger Slope –“
icon is displayed when the
trigger condition is set up to “
Slope-
”
“tone”
icon is displayed during wave
recording and event recording.
“Alt”
icon is displayed when the
<Alt>
push-
button is pressed.
“clock”
icon is displayed when timer is
On
. Is active when the instrument is
waiting for the measurement start up.
When the measurement start up is close,
the icon changes its colour to green and
starts to blink.
“battery”
icon is displayed when the instrument
is powered from the internal batteries. Icon
corresponds to the status of the batteries
(three,
two, one or none vertical bars inside the icon).
When voltage of batteries is too low, the icon
becomes red.
“Shift”
icon is displayed when the
<Shift>
push-button is pressed.
“
contact
force sensor
” icon is displayed when
SV 105AF with force sensor is connected. In
case force sensor readouts from any of the
connected SV 105AF go below 0 N it will change
colour to yellow and in case within the last 30 s
the readouts were below 0 N for more than 15 s
it will change to red, alerting on possible bad
calibration or hand strap lose mounting.
3.5. Data saving
Memory type
All available measurement results and settings can be stored in the instrument’s memory (micro
SD Card
) as
files in the predefined or assigned directories. The setup files are stored in the predefined directory SETUP.
The predefined directories can be changed by the user or renamed.
The
SD Card
memory is activated automatically after insertion of the card.
The “
SD Card
” icon is displayed when the micro SD card is inserted in the memory slot.
The
SD Card
memory is organised as a standard memory with directories and sub-directories (FAT32 file
system). It is possible to create and delete the directories.
The content of the instrument’s memory can be controlled with the help of the
File Manager
or
Setup Manager
function of the
File
menu.
In the
File Manager
or
Setup Manager
windows data files are described by their
file name with an extension (
SVN
,
SVL
,
SVT
or
WAV
) as well as additional icon
and function (
LM
,
1/1
or
1/3
).
Directory
New file or directory
Main results file .SVN
Logger file .SVL
Wave file .WAV
Setup file .SVT
