Svantek SV 106A Скачать руководство пользователя страница 17

Страница: 17 / 92

SV106A User Manual

Screen with two fields mode is always
available for most Functions of the
instrument.

<Start

Presentation modes

The results of the measurements can
be also presented in the

6 Channels

3 Profiles

modes. In these modes, the

results for six channels or three profiles
are presented on the screen. The user
can switch the presentation modes by
means of the

<Alt>

and





push-buttons pressed simultaneously.

<Alt/



Default settings measurements:

The default settings (set up by the manufacturer) for the profiles of all channels are as follows:



signal type:

Type: IEPE

;



weighting filter in channels 1-6:

Filter: Wd

;



type of the RMS detector:

1.0s

;



dose meter:

1-3 Dosimeter: WBV

;

4-6 Dosimeter: HAV

The user can change all the above-mentioned settings using the

Measurement

list. The instrument

remembers all made changes. Return to the default settings (set up by the manufacturer) is possible after the
execution of the

Factory Settings

position available in the

Auxiliary Setup

list.

3.4. Icons description

Description of the instrument state

Additional information about the instrument’s state is given by
means of the row of icons visible in the top of the display.

The type of measurement function and the measurement mode
(LM, DLM, 1/1 and 1/3 etc.) as well as the real-time clock (RTC)
is also displayed in the same line together with icons.

The meanings of the icons are as follows:

“play”

icon

is displayed when the

measurement is started

“plug”

icon is displayed when the instrument is

powered from the external source.

“stop”

icon is displayed when the

measurement is stopped.

“Internal memory”

icon is displayed when

internal memory is assigned for file saving.

“pause”

icon is displayed when the

measurement is paused.

“

SD Card

” icon is displayed when external micro

SD card memory is assigned for file saving.
Micro SD card is connected.

Содержание SV 106A




























































































Результаты поиска

Содержание SV 106A

Отзывы:

Бренды по названию

Популярные бренды

Svantek SV 106A, Руководство пользователя

Результаты поиска

Содержание SV 106A

Отзывы:

Бренды по названию

Популярные бренды