Sunsystem BURNiT PM Comfort 13 Plus, Руководство по обслуживанию

Страница: 44 / 47

Installer / Service Manual BURNiT PM Comfort
Plus
44 –ЕN
ATTENTION! FOLLOW THESE STEPS WHEN CLEANING:
• Switch OFF the pellet stove
• Wait until the pellet stove cools completely.
• Switch OFF the power supply.
• Do not use flammable detergents.
When making routine check the authorized service must do as following:
• Cleaning the fan;
• Cleaning all the inaccessible places burner;
• Complete check of the ignition system and the pellet loading system;
• Complete check of the condition of the insulations ropes on the door and
to change it if needed.
• Dismounting and cleaning the T-connection of the exhaust gases system
• Complete check of all the electrical parameters;
• Issuing an inspection report for the actions performed;
Cleaning the outer surface of pellet stove
Use soft cloth and neutral cleaning detergents.
Cleaning the door glass
Door glass is self-cleaned during stove operation.
However, the glass may dim from inside after a few hours of operation. The main
reason is the quality of used pellets and operation of exhaust gas system.
To clean the door glass OFF-and-cool the stove.
Use soft cloth with small quantity glass cleaning detergent.
After each cleaning check for distance of 2mm (two) between glass and upper edge
of the door (see the image).
Check /change of the door insulation rope
Rope ensures door tightness and proper operation of pellet stove.
Check the insulation rope periodically. If any damage is found, please contact an
authorized service to replace the insulation rope with a new one.
The rope is not covered by warranty.