Sunsystem BURNiT PM Comfort 13 Plus, Руководство по обслуживанию

Страница: 12 / 47

Installer / Service Manual BURNiT PM Comfort
Plus
12 –ЕN
•
Weather the connection is correctly grounded.
• The cable must not be with temperature higher than 75°C.
• In case of direct connection to the power supply – contact an authorized electrician
to perform the action.
• Turn off the pellet stove from the power supply when the product is not intended
to be used for a long period of time.
The connection with the power supply must be easy to access in order to be able to
easily disconnect the plug in case of accidents.
4. Fuel
ATTENTION! Pellet stove is tested only with wood-pellets with diameter 6-8 mm,
class EN plus A1, according EN 14961:2011.
Use only the fuel indicated in this manual! Otherwise the warranty will be void.
All pellets are biomass manufactured from common low-growing plants and trees.
The most common household type pellets are made of sawdust and milled wood
chippings which are waste material from wood used in the production of logs,
furniture and other products. Wood is the richest raw material which does not have
any impact on the production costs of food products or ethyl alcohol (ethanol). The
raw material is processed under high pressure and temperature and is pressed to
produce small-size cylindrical pellets. The production process may utilize soft wood
material (such as softwood, pine), hardwood (oak) as well as recycled waste wood.
Wood pellets are produced in hammer mills or wood pellet plants.
Advantages of wood pellets:
Convenient storage.
Pellet bags can be stored on a small area in a dry garage,
basement, service room or shed.
Easy loading. In most cases the boiler hopper needs loading only once a week – this
depends on the hopper capacity.
Better control of fuel quantity. The small size of the pellets allows for precise fuel
feeding. On the other hand, the supply of air for reaching optimal combustion
efficiency is easier to adjust since the fuel quantity in the combustion chamber
remains constant and predictable.
Fuel efficiency. High combustion efficiency is also determined by consistently low
moister content of pellets (consistently under 10% as opposed to 20% to 60%
moisture content of the logs). Low moisture content, controlled fuel portions and
precise air setting means high combustion efficiency and very low carbon oxides in
the flue gases.