Installer / Service Manual BURNiT PM Comfort
Plus
14 –ЕN
The optimal density of the pellets which guarantees their quality is 605-700 kg per
cubic meter.
Pellet moisture content must not exceed 10%. Make sure you store your fuel in a dry
and well-ventilated place. The optimal pellet ash content is ≤ 1%. This also provides
for less frequent cleaning intervals for the burner.
5. Exploitation of pellet stove
ATTENTION! MUST BE PERFORMED ONLY BY AN AUTHORIZED INSTALLER /
SERVICE!
5.1. Safety precautions
Pellet stove develops high temperature during operation mode. Beware of hot
surfaces - danger of burns. Do not leave the children and disabled people unattended
close to the product.
• It is forbidden the children and disabled people to operate the pellet stove.
• It is forbidden to pour water or other liquids which can cause temperature shock.
• Risk of fire. Keep the flammable (paper, plastic, etc.) materials and liquids
(spirits, etc.) at distance from the hot surface of the pellet.
5.2. Before first start of pellet stove
When stove installation is done may start the first ignition and may be set all
parameters.
To set parameters use controller display or use PC with correct software.
5.3. FIRST START OF PELLET STOVE:
- Make sure that all the wires are connected properly.
- Switch on the pellet stove.
- Perform the set up.
Содержание BURNiT PM Comfort 13 Plus
Страница 16: ...Installer Service Manual BURNiT PM Comfort Plus 16 N 6 2 Wiring controller Version 1 V1...
Страница 17: ...Installer Service Manual BURNiT PM Comfort Plus 17 N 6 3 Wiring controller Version 2 V2...
Страница 42: ...Installer Service Manual BURNiT PM Comfort Plus 42 N 6 9 9 Pressure Sensor Configuration...