Sunsystem BURNiT PM Comfort 13 Plus, Руководство по обслуживанию

Страница: 30 / 47

Installer / Service Manual BURNiT PM Comfort
Plus
30 –ЕN
T17
Delay time Combustion Power
Change
0 900 [s] 10 10
T18
Delay time Combustion Power
Change in exit from Ignition
0 900 [s] 10 10
T22 Delay time for Standby Input 0 900 [s] 10 10
T24 Length signalling of fuel lack 0 3600 [s] 180 180
T41 Work time of Pump 0 3600 [s] 30 30
T42
Maximum time of inactivity of
Pump
1 9600 [ore] 60 60
T43
Time, after which the stove goes
from Modulation to Standby if
Water Temperature> [Boiler
Thermostat t+d23] and A13= 1
0 9600 [s] 60 60
6.7.5. Enable’s Menu TP O8
Code Description Min. Max. U Def.
A01
За P26=0
0
Reached the Room Thermostat the
stove goes in Extinguishing
0 3 [nr] 2
1
Reached the Room Thermostat the
stove goes in Modulation
2
Reached the Room Thermostat the
stove goes in Standby
3
Reached the Room Thermostat the
system blocks the Pump until water
temperature < Th21
A06
0
In Modulation the system uses
Power 1: C03,U03
0 1 [nr] 0
1
In Modulation the system uses
Modulation Power: C11,U11
A07
0
The input AUX is used for ON/OFF
functioning
0 3 [nr] 0
1
The input AUX is used for
Modulation/Normal functioning
2
The input AUX is used for
Standby/Normal functioning
3
The input AUX is used to block the
Pump until water temperature <
Th21 ( P26=0 )
A13 0
Reached the Boiler Thermostat the
stove goes in Modulation
0 1 [nr] 1