Chapter 2
Installing a Sun Fire V445 Server Into a 4-Post Cabinet
25
Caution –
High leakage current. To prevent leakage current in excess of 3.5 mA, a
maximum of two power cords can be connected to a single branch circuit. The
remaining two power cords must be connected to a different branch circuit.
The following figure shows the Sun Fire V445 server back panel and identifies the
AC power inlets and I/O ports.
FIGURE 2-15
Back panel cable connections
TABLE 2-2
Back panel cable connections
Port
Information
1
AC inlets (4)
Power cords connect to each AC inlet. Do
not
connect the
cord to an AC
outlet
at this point. See
2
Network management port
(NET MGT)
You use this port to access ALOM features by way of the
network.
Note
: You must perform first-time configuration using
the serial management port before you can use the
network management port.
3
USB ports (2)
See the
Sun Fire V445 Server Administration Guide
for
information about devices you can connect to these ports.
1
2
3
4
5
6
