14
Sun Fire V445 Server Installation Guide • November 2006
Note –
Slide assemblies are labeled “LEFT” and “RIGHT”. Install them to the
appropriate side when facing the
front
of the cabinet.
3. With the help of an assistant, position one slide assembly on the inside of the
cabinet with the front (short) mounting bracket at the front of the rack.
a. Use the holes you marked in
b. Ensure that the slide assembly is level front-to-back.
c. Use the mounting pins on the brackets to help position the slide assemblies
during installation.
Caution –
Do not attempt to install the server before securing the slide assemblies
in the cabinet with the hardware provided.
4. Using two screws for each bracket, attach the front mounting bracket to the front
rail of the cabinet and attach the back (long) mounting bracket to the back rail of
the cabinet.
Count the rack rail holes to ensure that you are matching the holes used on the front
rail.
To attach the slide assembly, use the appropriate screws for your type of rack:
■
Racks with mounting holes sized for U.S. dimensions require 10-32 screws.
■
Racks with mounting holes sized for metric dimensions require M6 screws.
