12
Sun Fire V445 Server Installation Guide • November 2006
To use the rack alignment template, complete these steps:
1. Place the rack alignment template over the right front vertical rack rail, then move
the bottom of the template to the location on the rack rail where the bottom of the
server will be located.
FIGURE 2-6
Using the rack alignment template
2. Adjust the rack alignment template until the mounting slot openings are centered
on two holes in the rail and the retainer screw hole is visible.
When you do this, the top of the template is midway between a set of half-inch
holes.
3. Repeat
and
for the left front vertical rack rail.
Retainer screw hole
Mounting slots
Retainer screw hole
