18
Sun Fire V445 Server Installation Guide • November 2006
Caution –
The server is heavy. Two people are required to move the server.
Note –
Ensure that each slide assembly is fully retracted into the cabinet and check
that the ball-bearing runner on each slide assembly is all the way forward.
1. With one person on each side of the server, lift the server and approach the
cabinet with the back of the server facing the front of the cabinet.
2. Align the rounded ends of the inner glides on the server with the slide assemblies
in the cabinet.
Note –
Ensure that the inner glides attached to the server are inserted within the
ball-bearing runners.
3. Holding the server level, slide it evenly into the ends of the slide assemblies until
the inner glides stop.
FIGURE 2-10
Sliding the server into the cabinet
!
