Chapter 2
Installing a Sun Fire V445 Server Into a 4-Post Cabinet
27
Note –
The server also provides a TPE connector for the Sun Advanced Lights Out
Manager (ALOM) system controller. Use this connector to access ALOM features
through a network. See the
Sun Fire V445 Server Administration Guide
.
2. Connect the server’s serial management port to a terminal server or other serial
console device.
Plug in a Category-5 unshielded twisted-pair cable (which is included in your ship
kit) to the appropriate RJ-45 connector on the back panel. The cable length must not
exceed 328 feet (100 meters).
You should hear the connector tab snap into place.
Note –
For more information about connecting the Sun Fire V445 to a terminal
server, see
“About Setting Up a System Console Device” on page 30
Restoring the Cabinet
See the instructions provided with your cabinet to complete these steps.
1. Replace the side panels, if applicable.
2. Replace the front and back doors, if applicable.
What Next
The next tasks are to set up a system console device, power on the server, and install
the Solaris OS. See
