8
Sun Fire V445 Server Installation Guide • November 2006
The plastic bags of hardware contain screws and nuts that are shown below in actual
size.
FIGURE 2-2
Hardware included with the rackmounting kit
Any screws not used for rackmounting are spares.
Note –
Bar nuts are required (but not included) for nonthreaded cabinets. See the
instructions provided with your cabinet for more information.
Tools Required for Rackmounting
■
Phillips No. 2 screwdriver (use to tighten 10-32 and M6 screws)
■
Set of appropriate Allen wrenches to remove the side panels on some cabinets
■
Adjustable wrench to tighten the nuts on the mounting brackets
M4
10-32
M6
