Stryker IsoTour 2872, Руководство по эксплуатации

Страница: 17 / 592

P Prre evve en nttiivve e m ma aiin ntte en na an ncce e
At a minimum, check all items listed during annual preventive maintenance for all Stryker Medical products. You may need
to perform preventive maintenance checks more often based on your level of product usage.
Remove product from service before performing preventive maintenance.
N No otte e -- Clean and disinfect the exterior of the support surface before inspection, if applicable.
Inspect the following items for the standard models:
Zipper and covers (top and bottom) are free of tears, cuts, holes, or other openings
Unzip the covers to inspect the internal components for signs of stains from fluid ingress or contamination
Labels for legibility, proper adherence, and integrity
Handles are free of rips, cracks, and are intact
Foam has not degraded or come apart
Fire barrier for rips or other visible signs of damage
Spacer fabric, premium option only, for rips or other visible signs of damage
Run a diagnostic test if paired with a pump (refer to the IIsso oT To ou urr Pump Operations Manual)
N No otte e -- Only qualified personnel should complete the diagnostic test.
Product serial number:
Completed by:
Date:
L La au un nd de erriin ng g tth he e tto op p cco ovve err
W WA AR RN NIIN NG G
• Do not dry-clean, iron, or autoclave this product. This will degrade the coating on the top cover.
• Do not launder this product with bleach. This will degrade the coating on the top cover.
To machine launder the top cover:
1. Unzip and remove the top cover.
2. Set the heat on the washing machine to the lowest heat.
N No otte e -- The maximum water temperature should not exceed 30° C (86° F).
3. Add a powdered detergent¹. Follow the powdered detergent manufacturer’s instructions for use.
N No otte e -- ¹Stryker recommends that you use a non-phosphate powder detergent with optical brightener without enzymes.
N No otte e -- Stryker recommends that you do not use softening agents in the washing or drying machines. These agents
leave a residue that change the breathable properties of the fabric.
4. Set the agitation on the washing machine to normal or gentle spin.
D Drryyiin ng g tth he e tto op p cco ovve err
Optional: Stryker recommends that you place the top cover in a mesh bag to reduce mechanical abrasion.
To machine dry the top cover:
1. Set the heat on the drying machine to tumble dry at the lowest heat.
2872-009-005 Rev B.1 13 EN