Stryker IsoTour 2872, Руководство по эксплуатации

Страница: 15 / 592

P Po ossiittiio on niin ng g a a p pa attiie en ntt ffo orr T Trru uT Tu urrn n
Before you start T Trru uT Tu urrn n, you need to make sure that the patient is centered on the support surface.
W WA AR RN NIIN NG G
• Always center the patient on the support surface. Align the patient’s head toward the headboard before you start
T Trru uT Tu urrn n. Check the patient frequently to make sure that you maintain the proper position.
• Always make sure that tubes or wires connected to the patient are long enough, stable, and secure when you use
T Trru uT Tu urrn n.
• Do not exceed the safe working load of this product. Excess weight could cause unpredictable safety and performance
of this system.
C CA AU UT TIIO ON N -- Do not allow sharp objects to come into contact with the support surface that could puncture, tear, or cut the
cover.
N No otte e -- When radiological images of the patient are taken on this product, the internal components of this product may
cause artifacts or distort images.
To position the patient:
1. Position the patient in the center of the support surface, align the patient’s head toward the headboard.
2. Check the patient as you use T Trru uT Tu urrn n for correct position (Figure 3).
F Fiig gu urre e 3 3 –– C Co orrrre ecctt p pa attiie en ntt p po ossiittiio on n
2872-009-005 Rev B.1 11 EN