EN
763.134 Z02 1913 coolcept_fleX
23
Data transmitted via a public network are not protected from being accessed
by third parties.
Data transmission via a public network may cause additional costs.
►
Obtain information on costs possibly involved prior to the use of a public
network.
►
Use a public network at your own risk.
A type A residual current breaker (RCCB) is sufficient.
•
Lay the cables such that the connection cannot come loose accidentally.
•
Ensure that the fire safety measures of the building are not impaired when routing
cables for the device.
•
Make sure that no inflammable gases are present.
•
Observe all applicable installation regulations and standards, national laws and connec-
tion values specified by the regional power supply company.
•
Observe the connection ratings specified on the type plate.
•
Do not connect the DC cables to ground potential.
The DC inputs and the AC output are nor galvanically isolated from each other.
4.2
Mounting the inverter
4.2.1 Attaching the mounting plate
1. Place mounting plate on the mounting surface. The
locking plate (1) must point upwards. The retaining tabs
point to the front.
2. Fasten the mounting plate to the mounting surface with
4 screws. For the drilling pattern refer to chapter 16.
The mounting materials are not included in the scope of
delivery.
