EN
12
763.134 Z02 1913 coolcept_fleX
2.5
Safety symbols on the device
1
Disposal information (separate collection of electrical and
electronic equipment)
2
Request to disconnect the power sources prior to any
intervention
3
Information on presence of voltage after switching off the
inverter
4
Serial number (barcode and plain text)
5
Warning of voltage (two voltage sources)
6
Warning of hot surface
7
Follow the instructions
3
Structure and functioning
The coolcept fleX inverter is connected between PV generators and consumers. Via the
DC input and the MPP tracker, PV generators feed in DC, which the inverter converts into
AC. Consumers connected to the AC connection are supplied AC by the inverter.
3.1
Structure of the inverter
1
Case
2
Display (monochrome, 128 x 64 pixels)
3
Operating buttons: ESC,
,
, SET (from left to right)
4
RJ45 sockets (LAN, COM1, COM2)
5
AC connection
6
DC connection (DC input, MPP tracker)
7
DC connection (StecaGrid ####_2: 2 x DC-input,
2 x MPP tracker)
8
DC disconnector (interrupts the plus and minus inputs
simultaneously)
9
Type plate, serial number, warning notices
