EN
38
763.134 Z02 1913 coolcept_fleX
For reasons of clarity, only the "
" and "SET" operating buttons are depicted in the
menu structure. The individual functions of the operating buttons are described in sec-
tion 3.4.
Due to further technical development, changes of the menu structure are
possible after delivery of this document. The current version of the menu
structure is available in the download area of our homepage.
7.2
Navigating the menu structure
•
To go from one "Output power" status display to the other status displays: scroll through
the status displays with the "
" operating buttons.
•
To go from the "Output power" status display to the main menu: press "SET".
•
To go to the other menu items within the main menu: scroll through the menu with the
"
" operating buttons.
•
To go from a menu item to a submenu: press "SET".
•
To go to other menu items within a submenu: scroll through the submenu with the "
"
operating buttons.
•
To return from any menu to the "Output power" status display: press and hold "ESC" for
1 second.
7.3
Status displays
The status displays show various measured values. "Output power" and "Grid voltage"
have been preset in the factory and are always displayed. Further status displays that shall
be shown can be defined in "Settings" > "Meas. values".
7.3.1 Displaying output power
1
Menu name
2
Measurement with units
3
Time
4
IP address
In the event of too little solar radiation, the display does not show any measured value (e.g.
at night).
All other menus of the status display are similar in structure and are therefore not men-
tioned separately.
