stayer MULTI GAS CUTTER, Руководство по эксплуатации

Страница: 33 / 44

ENGLISH
33
33
28. Bottom Protecting cap.
29. Bottom clamping plate.
30. Metal blade.
31. Top clamping plate.
32. Carrying belt.
33. Blade cover.
34. Cutting blade.
35. Grease nozzle.
36. Transmission.
37. Locking lever.
38. Grip.
39. Safety lever.
40. Gear box.
41. Extender of 1 m.
42. Chain saw.
43. Chain saw oil tank.
44. Oil flow adjustment screw.
3 PACKAGE CONTENT LIST
- Remove all packing materials.
- Remove remaining packaging and transit supports (if
existing).
- Check the completeness of the packing content
- Check the appliance, the power cord, the power plug
and all accessories for transportation damages.
- Keep the packaging materials as far as possible till the
end of the warranty period. Dispose it into your local
waste disposal system afterwards.
WARNING: Packing materials are no toys!
Children must not play with plastic bags!
Danger of suffocation!
LONG REACH 3-en-1 combi: brush cutter, grass trimmer,
hedge trimmer 33Cc
Safety blade cover.
Carrying belt.
Manual.
Spark plug wrench.
When parts are missing or damaged, please
contact your dealer.
4 SYMBOLS
In this manual and/or on the machine the following sym-
bols are used:
Read instructions carefully.
Denotes risk of personal injury or damage to the
tool.
Wearing of protective shoes advised.
Wear safety glasses and ear protection
Wear gloves.
Never operate the machine in the rain or in damp
or wet condition. Moisture is a shock hazard..
Warning! Flying objects
Don’t use the trimmer in any position that causes
any part to come within 10m of overhead
electrical line.
Keep hands away from blades, Don’t touch the
blades when starting or while operating the unit.
Keep a minimum distance of 15m between the
machine and third parties during use.
Extremely hot surface. Do not touch a hot muffler,
gear box or cylinder. You may get burned. These
parts get extremely hot from operation and
remain hot a short time after the unit is turned off.
5 GENERAL SAFETY WARNINGS
Read all safety warnings and all instructions.
Failure to follow all warnings and instructions
may result in electric shock, fire and/or serious
injury. Save all warnings and instructions for future
reference.
5.1 Work area
- Keep work area clean and well lit. Cluttered and dark
areas invite accidents.
- Do not operate tools in explosive atmospheres, such
as in the presence of flammable liquids, gases or dust.
Tools create sparks which may ignite the dust or fumes.
- Keep children and bystanders away while operating a
tool. Distractions can cause you to lose control.
5.2 Personal safety
- Stay alert, watch what you are doing and use common
sense when operating a tool. Do not use a tool while
you are tired or under the influence of drugs, alcohol
or medication. A moment of inattention while operating
tools may result in serious personal injury.
- Use safety equipment. Always wear eye protection.
Safety equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used whenever
conditions require will reduce personal injuries.
- Avoid accidental starting. Ensure the switch is in the
off position before plugging in. Carrying tools with your
finger on the switch or plugging in tools that have the
switch on invites accidents.
- Remove any adjusting key or wrench before turning the
tool on. A wrench or a key left attached to a rotating part
of the tool may result in personal injury.
- Do not overreach. Keep proper footing and balance
at all times. This enables better control of the tool in
unexpected situations.
- Dress properly. Do not wear loose clothing or jewelry.
Keep your hair, clothing and gloves away from moving
parts.