Standard SD462, Руководство оператора

Страница: 70 / 558

Basics
54
2
Making a Master and Prints
Using the default settings, you can
process masters and make prints in a
single operation. This is called "Auto
Cycle". You can also make masters
and prints in separate operations. See
the procedure below.
Note
❒
To create masters and make prints
in a single operation, see p.49 “Ba-
sic Procedure”.
A
Make sure the
{
Master Making
}
mode select key is lit.
Note
❒
If it is not lit, press the
{
Master
Making
}
mode select key.
B
Place your originals.
Reference
p.47 “Placing Originals”
C
Press the
{
Start
}
key.
Note
❒
Press the
{
Proof
}
key to check
the image before making prints.
Reference
To change the image position,
see p.59 “Adjusting the Position
of Printed Images”.
D
Make sure the
{
Print
}
mode select
key is lit.
E
Enter the required number of
prints using the number keys.
AJK406S
AJK408S
AJK403S
AJK402S