Standard SD462, Руководство оператора

Страница: 287 / 558

Printing with NetWare
37
5
J
Create a print queue as follows:
Note
❒
If you are using a currently defined print queue, proceed to step
K
A
On the [ Available Options ] menu, click [ Print Queue Information ] , and then
press the
{
ENTER
}
key.
B
Press the
{
INSERT
}
key, and then enter a print queue name.
C
Press the
{
ESCAPE
}
key to return to the [ Available Options ] menu.
K
Create a printer as follows:
A
On the [ Available Options ] menu, click [ Print Server Information ] , and then
press the
{
ENTER
}
key.
B
To create a new print server, press the
{
INSERT
}
key, and then enter a
print server name.
Note
❒
If you are using a currently defined print server, select one of the print
servers shown in the
[ Print Server ] list.
Important
❒
Use the same name as that specified in NIB Setup Tool. (Step
G
-
A
).
C
On the [ Print Server Information ] menu, click [ Print Server Configuration ] .
D
On the [ Print Server Configuration ] menu, click [ Printer Configuration ] .
E
Select the printer indicated as “Not Installed”.
Important
❒
Use the same number as that specified as the Remote Printer No. using
NIB Setup Tool. (Step
G
-
D
).
F
If you want to change the printer name, enter a new name.
Note
❒
The name “Printer x” is assigned to the printer. “x” stands for the
number of the selected printer.
G
Click
[ Remote Parallel, LPT1 ]
as the printer type.
IRQ, Buffer size, Starting form, and Queue service mode are automatically
configured.
H
Press the
{
ESC
}
key, and then click [ Yes ] when the confirmation message
appears.
I
Press the
{
ESC
}
key to return to the [ Print Server Configuration ] menu.