SpectraLink IP-DECT 200 Скачать руководство пользователя страница 373

Страница: 373 / 456

14215700-IG, Edition 15.0
May 2020, Original document

373

Field

Setting

Broadcast announcements
(Optional)

Specifies if UPnP announcements are broadcasted.

If enabled, the device broadcasts announcements auto-
matically.

General Configuration - Remote syslog

Host (Optional)

Enter the host or IP address of the remote syslog server.

If specified, messages will be sent to the server.

Port

Server port used for remote syslog.

Default value: 514

Facility

Remote syslog facilities used for log messages.

Default value: Local 0

Refer to RFC5424.

Level

Log level to send via syslog.

Possible values:

emergency

critical

error

warning

notice

info

debug

Default value: Info

Scope (Optional)

Scope of syslog settings.

If set to

all

, the settings will override any local settings on e.g.

connected base stations.

If set to

server only

, these settings will only apply to the server.

If set to

server and mr

, these settings will only apply to the

server and media resource.

Default value: all

General Configuration - SNMP

Enabled (Optional)

If enabled, access to the SNMP is allowed, and the server will
respond to SNMP requests.

Community (Optional)

SNMP Community name (public). The server will respond to
requests from a manager in this community.

Trap host (Optional)

Address of SNMP trap host to which SNMP traps are sent.

Trap community (Optional)

SNMP trap Community name used for sending traps.

System location (Optional)

Information about the physical location of this host.

E.g. telephone closet, 3rd floor

System contact (Optional)

The textual identification of the contact person for this host,
together with information about how to contact them.

Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide

Содержание IP-DECT 200









































































































































































































































































































































































































































































Результаты поиска

Содержание IP-DECT 200

Отзывы:

Похожие инструкции для IP-DECT 200

Бренды по названию

Популярные бренды

SpectraLink IP-DECT 200, Руководство по установке и настройке

Результаты поиска

Содержание IP-DECT 200

Отзывы:

Похожие инструкции для IP-DECT 200

Бренды по названию

Популярные бренды