72
TRAK Machine Tools
Southwestern Industries, Inc.
TRAK TMC Mills with ProtoTRAK RMX CNC Safety, Installation, Maintenance, Service & Parts List
to a backup file and the original file is cleared and data is once again captured. Once again as the file
reaches a size of 20 MB it copies over the previous backup file. From here the user can save the file to a
USB flash drive by pressing the F8 softkey. Once this is done it prompts you to save the file. The file will
be saved as a zip file to your USB device. The file will be called errorlog.zip. To clear the contents of the
current log, press the CLEAR FILE button.
4.8.3.7
Code 326: Error Message Display
Useful for checking error messages if the error number is already known.
4.8.3.8
Code 327: Display Memory Check
This service code is used checking the amount of free memory available from system RAM. This can be
useful for troubleshooting any issues where memory may be a factor, such as system slowing down, or
intermittently not responding. Press the
DRIVE SPACE
button to check the amount of free space on the
system drive as well as removable devices such as USB flash drives. A service technician may ask you to
take note of these screens while troubleshooting certain computer related issues.
4.8.4
Section D - Operator Defaults/Options Codes Details
The following codes allow the user to set programming defaults or turn features on or off. To get to any
of these codes go to Service Codes, press “D” and press the cod
e you wish to view.
4.8.4.1
Code 79: Beeper On
This turns on the beeper to the control keys.
4.8.4.2
Code 521: Check Control /Indexer IO
This service code will launch an external application that can be used to check all the control’s inputs and
outputs. This service code should be used only by qualified service technicians.
