1
TRAK Machine Tools
Southwestern Industries, Inc.
TRAK TMC Mills with ProtoTRAK RMX CNC Safety, Installation, Maintenance, Service & Parts List
1.0
Safety
The safe operation of the TRAK TMC depends on its proper use and the precautions taken by each
operator.
•
Read and study this manual and the ProtoTRAK TMC/VMC2 Programming, Operating, and
Care Manual. Be certain every operator understands the operation and safety requirements of
this machine before its use.
•
Never run the machine with enclosure doors open when in production ops.
•
Always wear safety glasses and safety shoes.
•
Always stop the spindle and check to ensure the CNC control is in the stop mode before
changing or adjusting the tool or workpiece.
•
Never wear gloves, rings, watches, long sleeves, neckties, jewelry, or other loose items when
operating or around the machine.
•
Use adequate point of operation safeguarding. It is the responsibility of the employer to
provide and ensure point of operation safeguarding per OSHA 1910.212 - Milling Machine.
1.1
Safety Publications
Refer to and study the following publications for assistance in enhancing the safe use of this machine.
Safety Requirements for Machining Centers and Automatic, Numerically Controlled Milling,
Drilling and Boring Machines
(ANSI B11.23-2002) (R2007). Available from The American National
Standards Institute, 1819 L Street N.W., Washington D.C. 20036
Concepts and Techniques of Machine Safeguarding
(OSHA Publication Number 3067). Available
from The Publication Office - O.S.H.A., U.S. Department of Labor, 200 Constitution Avenue, NW,
Washington, DC 0210.
1.2
Danger, Warning, Caution, Note Labels & Notices as Used in This
Manual
DANGER
- Immediate hazards that
will
result in severe personal injury or death. Danger labels on the
machine are red in color.
WARNING
- Hazards or unsafe practices which
could
result in severe personal injury and/or damage to
the equipment. Warning labels on the machine are orange in color.
CAUTION
- Hazards or unsafe practices, which
could
result in minor personal injury or
equipment/product damage. Caution labels on the machine are yellow in color.
NOTE -
Call attention to specific issues requiring special attention or understanding.
