22
TRAK Machine Tools
Southwestern Industries, Inc.
TRAK TMC Mills with ProtoTRAK RMX CNC Safety, Installation, Maintenance, Service & Parts List
2.5.1
Releasing the Head Support Bracket
1.
Start with TMC machine under power.
2.
Remove screws from head support that attach to the table and ram as shown in figure 2.5b.
3.
Press power reset to turn servos on.
4.
Run SERV CODE 505, select EHW, select Z axis using 0.01 resolution.
5.
Slowly rotate Z EHW clockwise to raise Z Axis off head support bracket.
6.
Remove support.
2.6
Leveling Procedure
Leveling the TMC in the field consists of leveling the machine and then adjusting the level, if necessary,
to make sure the tram of the spindle is perpendicular to the table. Refer to figure 2.6.1a, 2.6.1b or 2.6.1c
for the Leveling Pad Dimensions and Locations for your specific TMC.
2.6.1
Leveling Pad Specifications
Figure 2.6.1a - TMC5 Leveling Pad Dimensions
