19
TRAK Machine Tools
Southwestern Industries, Inc.
TRAK TMC Mills with ProtoTRAK RMX CNC Safety, Installation, Maintenance, Service & Parts List
2.5
Uncrating the TMC
1.
Remove the loose articles from the pallet and check them against the loose Inventory Checklist
(Section 2.7).
2.
The tool measurement cart kit and the tooling pre-setter will require some assembly.
Instructions to assemble will be found in the kit. (Optional Equipment)
3.
Remove the 5 M6x15 SHCS that secure the saddle and table support brackets, and remove the
brackets (See figure 2.5.a)
4.
Remove the 4 M12x40 SHCS that secure the column support bracket from the table and the
head, but
DO NOT ATTEMPT TO REMOVE THE SUPPORT AT THIS TIME
. (See figure 2.5.b)
5.
Remove the ATC cover, left. Remove the M8x60 SHCS that secures the ATC during shipping (See
figure 2.5.c).
6.
Remove the 4 (left door) + 4 (right door) M6x16 SHCS that secures the front doors (see Figure
2.5.d & 2.5.e).
Figure 2.5a
