6-21
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
3.
Remove the four hexagonal head cap bolts (M4
x
8)
and move the X stopper (T)/(B) from the basic console
to the same position of the end console (the console
that is connected at the end).
4.
Remove the four hexagonal head cap bolts (M5
x
12)
and the four washers (D5) from the X sliders (top)/
(bottom) of the transfer assembly. Remove the belt
fixing panel (X).
X stopper (T)
X stopper (B)
M4
x
8
M4
x
8
M4
x
8
Belt fixing panel (X)
X slider (top)
Washers
(D5)
Washers (D5)
X slider (bottom)
Belt fixing panel (X)
M5
x
12
M5
x
12
6-5. Connecting Extension Consoles
5.
Loosen the hexagonal head cap bolt (c) of the upper X
tension assembly to lighten the load of the spring.
6.
Remove the two hexagonal head cap bolts (d) that fix
the upper X tension assembly and remove the X
tension assembly.
7.
Loosen the hexagonal head cap bolt (a) fixing the X
belt pulley (top). While holding the X belt pulley (top)
with hands, remove the two hexagonal head cap bolts
(b) and two washers (D4). Remove the X belt pulley
(top).
n
Be careful that the X belt pulley falls when the two
hexagonal head cap bolts (b) are removed. Be sure to
support the X belt pulley with hands during removal.
8.
Loosen the hexagonal head cap bolt (c) of the lower X
tension assembly in the same way as step 5.
9.
Remove the two hexagonal head cap bolts (d) fixing
the X tension assembly and remove the X tension
assembly.
10. Loosen the hexagonal head cap bolt (a) fixing the X
belt pulley (bottom). Remove the two hexagonal head
cap bolts (b) and two washers (D4). Remove the X
belt pulley (bottom).
(b) M4
x
14
(d) M4
x
8
(c) M4
x
25
(d) M4
x
8
(b) M4
x
14
(b) M4
x
14
(b) M4
x
14
(a) M4
x
14
(a) M4
x
14
Washers (D4)
Washers (D4)
X belt pulley
assembly (bottom)
X belt pulley
assembly (top)
X tension
assembly
X tension
assembly
(c) M4
x
25
