6-54
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
6-9-3. Routing the Cables to Be Connected
to the Drives
After mounting the drives in the console, route the cables
to be connected to each drive.
The following parts for routing the cables are supplied
using the console.
DMS-B150L/B210S
.
Tie mount :
30
.
Repeat tie :
8
.
Tie band :
40
.
Screw (PWH4
x
8) : 9
DMS-B80L/B110S
.
Tie mount :
20
.
Repeat tie :
6
.
Tie band :
30
.
Screw (PWH4
x
8) : 6
DMS-EX150L/EX210S
.
Tie mount :
10
.
Repeat tie :
4
.
Tie band :
20
.
Screw (PWH4
x
8) : 10
1.
Attach the tie mount using the screws of the rear panel
of the drive.
2.
Gather the cables and bundle them with the repeat tie
at the tie mount.
n
The attachment position depends on the used drive.
3.
Attach the six tie mounts using the screws fixed on the
frame or the screws supplied.
4.
Bundle the cables at the tie mount using the tie band.
5.
Use the tie band at appropriate intervals to fix the
cables.
n
Route the cables after pulling out the drive stages.
Repeat tie
Repeat tie
Screw of
rear panel
Screw of
rear panel
Tie mount
Tie mount
In case of GY-2120
In case of GY-8240
6-9. Installation of the Tape Drive
SCSI cable
RS-232C
cable
Power cord
Power cord
2
2
2
2
2
2
1
Tie mount
+
Repeate tie (type 1)
2
Tie mount
+
Tie band (type 2)
In case of DMS-B80L/B110S/B150L/B210S
In case of DMS-EX150L/EX210S
1
1
SCSI cable
RS-232C
cable
2
2
1
1