Sony PDW-HD1550, Руководство по эксплуатации

Страница: 20 / 136

20
Rear Panel
Chap
te
r 2
Name
s
an
d
F
u
nc
tio
n
s
o
f Pa
rt
s
Rear Panel
a
SD/HDSDI INPUT (SDSDI/HDSDI signal input)
connector (BNC type)
This inputs an SDSDI or HDSDI format video/audio
signal.
b
HDSDI OUTPUT 1, 2 (SUPER) (HDSDI signal
output 1, 2 (superimpose)) connectors (BNC type)
These output HDSDI format video/audio signals.
You can superimpose timecodes or other information on
the output of the HDSDI OUTPUT 2 (SUPER) connector
using the CHAR SEL setting on the HOME page of the
function menu or the setting for setup menu item 028 HD
CHARACTER. You can always disable the
superimposition of data independently of the setting for
CHAR SEL using the setting for setup menu item 028.
See “Basic Operations of the Function Menu” (page 39)
for more information about the CHAR SEL setting.
See page 88 for more information about the setup menu
item 028 HD CHARACTER.
To treat the input and output signals of these connectors as
non-audio signals, set maintenance menu item M372
NON-AUDIO INPUT.
For details, see maintenance menu item M37 (page 105).
c
SDSDI OUTPUT 1, 2 (SUPER) (SDI signal outputs
1, 2 (superimpose)) connectors (BNC type)
These output SDSDI format video/audio signals.
When the unit is shipped from the factory, audio signal
output is eight channels with no switching, and RP188
timecode output is set to on. You can change these settings
with setup menu item 828 SDI AUDIO OUTPUT
SELECT and setup menu item 920 SD-SDI H-ANC
CONTROL.
The output from the 2 (SUPER) connector can have
timecode and other text information superimposed. To
turn superimposition off, set CHAR SEL on the HOME
page of the function menu to “OFF”.
See “Items in the extended menu” (page 92) for more
information about setup menu settings.
See “Basic Operations of the Function Menu” (page 39)
for more information about the CHAR SEL setting.
d
REMOTE (9P) (remote control 9-pin) connector
(D-sub 9-pin)
Connect a controller that supports the RS-422A Sony 9-pin
VTR control protocol.
e
HDMI OUT connector
Connects to an HD projector, HD television, or other HD
consumer device, and outputs digital signals (video, audio,
and control signals).
1 Power supply section
(see page 21)
2
Analog audio signal input/
output section
(see page 21)
5
HDMI OUT connector
4
REMOTE (9P) connector
6 DC IN 12V connector
7 REMOTE connector
2
HDSDI OUTPUT 1, 2
(SUPER) connectors
8
COMPOSITE OUTPUT 1, 2
(SUPER) connectors
9 REF. VIDEO INPUT
connectors
4
Timecode input/output
section
(see page 22)
qa MAINTENANCE connectors
3
SDSDI OUTPUT 1, 2 (SUPER)
connectors
q;
(network) connector
1
SD/HDSDI INPUT
connector
3 Digital audio signal input/
output section
(see page 22)