105
Maintenance Menu
Chap
te
r 7
Men
u
s
M37: AUDIO
CONFIG
M370: HEAD ROOM
Select the audio reference level (headroom).
–20dB, –18dB, –16dB, –12dB, EBUL
Note
EBUL can be selected only when the system frequency is 50i/25P.
M371: DATA LEN
Specify the audio channel configuration used during IMX recording.
16bit×8ch [16×8]:
8-channel configuration with 16-bit data width.
24bit×4ch [24×4]:
4-channel configuration with 24-bit data width.
M372: NON-AUDIO
INPUT
Select whether to handle digital audio signals as non-audio signals during
recording.
audio:
Handle as linear PCM audio signals.
data:
Handle as non-audio signals.
Sub-item
1
tr1/tr2
2
tr3/tr4
3
tr5/tr6
4
tr7/tr8
M373: IN LEVEL
Set the upper limit for the signal level input to audio channels 1/3/5/7 or 2/4/6/8.
+4dB, 0dB, –3dB, –6dB, EBUL
Note
EBUL can be selected only when the system frequency is 50i/25P.
Sub-item
1
ANALOG1
2
ANALOG2
3
ANALOG3
4
ANALOG4
M374: ANALOG I/O
Specify whether to output analog audio signals from the ANALOG AUDIO
OUTPUT 1 and 2 connectors or input analog audio signals as the ANALOG
AUDIO OUTPUT 3 and 4 connectors.
2ch [2ch]:
Output from the ANALOG AUDIO OUTPUT 1 and 2 connectors.
4ch [4ch]:
Input as the ANALOG AUDIO INPUT 3 and 4 connectors.
M377: OUT LEVEL
Set the reference level for audio output signals.
+4dB, 0dB, –3dB, –6dB, EBUL
Note
EBUL can be selected only when the system frequency is 50i/25P.
M39: OTHER
CONFIG
M391: VITC REC
Select whether to record the VITC in the input HDSDI signals in the LTC user bits
area.
disable [dis]:
Do not record.
enable [ena]:
Record.
Notes
• Recording of VITC is enabled only when this is set to “enable,” and F1: TCG is
set to “EXT” and F2: PRST/RGN is set to “TC” on the P4 TC page in the
function menu.
• When set to “enable,” the value in the user bits area is output for VITC during
playback. Note that the value of the user bits area is output for VITC even when
playing back clips recorded without using this function.
• This setting has no affect during SD format recording/playback.
M395: FRMT MEDIA
Specify whether to disable the Format Media command of the Clip Menu.
disable [dis]:
Disable the Format Media command.
enable [ena]:
Enable the Format Media command.
M399: VERIFY USB
Specify whether to perform verification when copying data to the USB drive.
off:
Verification is not performed.
on:
Verification is performed.
M39B: COPY TO USB
Specify whether to prohibit copying to external storage.
disable [dis]:
Disable copying.
enable [ena]:
Enable copying.
M3: OTHERS: Other setting items
Item
Setting
