40
Basic Operations of the Function Menu
Ch
apt
er 3 Prep
ara
tio
ns
a) Only when TCG on page P4 TC of the function menu is set to “INT”, and
PRST/RGN is set to “PRESET”.
P1 INPUT page
a) Selectable when maintenance menu item M374 ANALOG I/O is set to
“4ch” only.
P2 INPUT page
a) Selectable when maintenance menu item M374 ANALOG I/O is set to
“4ch” only.
F5: MONITR R Selects the channel to monitor as the right
monitor channel.
CH1, CH2, CH3, CH4, CH5, CH6, CH7,
CH8
CH1/2, CH3/4, CH5/6, CH7/8 (MIX)
F6: OUT REF
Selects the reference signal for the output
signals of this unit.
REF:
Use the signal input to the REF.
VIDEO INPUT connector as the output
reference signal.
INPUT:
Use the input video signal as the
output reference signal.
Item
Setting
F1: INT SG
Sets whether to select test signal from
internal signal generator.
OFF:
Do not select.
ON:
Select.
F2: V INPUT
Selects the video input signal.
HDSDI:
HDSDI signal
SDSDI:
SDSDI signal
Notes
• Test signal is input when INT SG on this
page is set to “ON” and setup menu item
710 is set to anything other than “Off”.
• When the system frequency is 23.98P, the
setting is fixed “HDSDI”.
F3: A1 INPUT
Selects the audio input signal to assign to
audio channel 1.
SDI:
Audio signal embedded in the SDI
signal
ANALOG1(MIC1):
Input signal to the
ANALOG AUDIO INPUT 1 connector
AES/EBU1:
Input signal to the DIGITAL
AUDIO (AES/EBU) IN 1/2 connectors
Note
Test signals are input to all audio channels
1 to 8 when INT SG on this page is set to
“ON” and setup menu item 808 is set to
anything other than “off”.
F4: A2 INPUT
Selects the audio input signal to assign to
audio channel 2.
SDI:
Audio signal embedded in the SDI
signal
ANALOG2(MIC2):
Input signal to the
ANALOG AUDIO INPUT 2 connector
AES/EBU2:
Input signal to the DIGITAL
AUDIO (AES/EBU) IN 1/2 connectors
F5: A3 INPUT
Selects the audio input signal to assign to
audio channel 3.
SDI:
Audio signal embedded in the SDI
signal
ANALOG1(MIC1):
Input signal to the
ANALOG AUDIO INPUT 1 connector
ANALOG3:
Input signal to the ANALOG
AUDIO INPUT 3 connector
a)
AES/EBU3:
Input signal to the DIGITAL
AUDIO (AES/EBU) IN 3/4 connectors
Item
Setting
F6: A4 INPUT
Selects the audio input signal to assign to
audio channel 4.
SDI:
Audio signal embedded in the SDI
signal
ANALOG2(MIC2):
Input signal to the
ANALOG AUDIO INPUT 2 connector
ANALOG4:
Input signal to the ANALOG
AUDIO INPUT 4 connector
a)
AES/EBU4:
Input signal to the DIGITAL
AUDIO (AES/EBU) IN 3/4 connectors
Item
Setting
F1: A5 INPUT
Selects the audio input signal to assign to
audio channel 5.
SDI:
Audio signal embedded in the SDI
signal
ANALOG1(MIC1):
Input signal to the
ANALOG AUDIO INPUT 1 connector
AES/EBU1:
Input signal to the DIGITAL
AUDIO (AES/EBU) IN 1/2 connectors
F2: A6 INPUT
Selects the audio input signal to assign to
audio channel 6.
SDI:
Audio signal embedded in the SDI
signal
ANALOG2(MIC2):
Input signal to the
ANALOG AUDIO INPUT 2 connector
AES/EBU2:
Signal input to the DIGITAL
AUDIO (AES/EBU) IN 1/2 connectors
F3: A7 INPUT
Selects the audio input signal to assign to
audio channel 7.
SDI:
Audio signal embedded in the SDI
signal
ANALOG1(MIC1):
Input signal to the
ANALOG AUDIO INPUT 1 connector
ANALOG3:
Input signal to the ANALOG
AUDIO INPUT 3 connector
a)
AES/EBU3:
Input signal to the DIGITAL
AUDIO (AES/EBU) IN 3/4 connectors
F4: A8 INPUT
Selects the audio input signal to assign to
audio channel 8.
SDI:
Audio signal embedded in the SDI
signal
ANALOG2(MIC2):
Input signal to the
ANALOG AUDIO INPUT 2 connector
ANALOG4:
Input signal to the ANALOG
AUDIO INPUT 4 connector
a)
AES/EBU4:
Input signal to the DIGITAL
AUDIO (AES/EBU) IN 3/4 connectors
F5: SPEAKER
Sets whether or not the built-in speakers
produce output.
OFF:
Not produce output.
ON:
Produce output.
F6: –
(Unassigned function button)
Item
Setting
