25
Initial Setup
Chapt
er
3
Pre
para
tio
ns
Initial Setup
This unit is shipped with the system frequency, and current
date and time still unset.
Therefore, you need to make initial setup settings before
using the unit. (You cannot use the unit without setting it
up.)
Once the unit has been set up, the settings are retained even
when the unit is powered off.
Use the following procedures.
1
Power the unit on.
The INITIAL SETUP screen appears on the display.
2
Turn the PUSH SET knob to select the area of use.
Display UC (for regions outside Japan) or J (for
Japan), and then press the SET function button (F5).
The system frequency screen appears.
3
Turn the PUSH SET knob to select the system
frequency.
Display the system frequency that you want to use, and
then press the SET function button (F5).
4
If you want to save the settings made up to this point,
press the SET function button (F5) again.
The message “NOW SAVING...” appears, and the
setting screen disappears. Then the unit powers itself
off and on again.
To return to the original screen without saving
settings
Press the RETURN function button (F1).
To set the date and time
Set maintenance menu item M3D DATE/TIME PRESET.
For details, see maintenance menu item M3D (page 106).
