115
Troubleshooting
A
ppe
ndix
When a memory card is inserted
a)
Over DUR!
EXCESSIVE DURATION IS IN DISC.
The total amount of recorded data exceeds the
capacity of the disc.
No Support!
FORMAT NOT SUPPORTED.
RECORDING AND PLAYBACK IS NOT
POSSIBLE.
This appears when a disc recorded in an
unsupported recording format has been inserted. Use
a disc that is supported by this unit.
DISC frequency mismatch! RECORDING AND PLAYBACK IS NOT
POSSIBLE.
SYSTEM SETTINGS DIFFERENT FROM
DISC.
This appears when the system frequency setting of
this unit and the system frequency of the inserted
disc do not coincide.
Replace the disc with one that is compatible with the
system frequency setting of this unit, or change the
system frequency setting of this unit.
1080/23.98P DISC
DISC CANNOT BE RECORDED.
SYSTEM SETTINGS DIFFERENT FROM
DISC.
This appears when the system frequency setting of
this unit and the system frequency of the inserted
disc do not coincide. Only pulldown playback is
possible.
Replace the disc with one that is compatible with the
system frequency setting of this unit, or change the
system frequency setting of this unit.
REC INH!
AUTO FORMATTING WAS NOT
COMPLETED.
THE DISC WRITE PROTECT TAB IS SET
TO SAVE.
PLEASE EJECT DISC.
Set the Write Inhibit tab on the disc so as to enable
recording
FORMAT NG!
AUTO FORMATTING WAS NOT
COMPLETED.
Eject the disc and then insert it again or insert
another disc.
DI read err
CANNOT READ DISC INFORMATION.
PLEASE EJECT DISC.
DRV ADJ err
CANNOT PERFORM AUTO DRIVE
ADJUSTMENT.
Read err
CANNOT READ DISC DATA.
PLEASE EJECT DISC.
BCA Read Error!
CANNOT READ DISC BCA AREA.
PLEASE EJECT DISC.
DISC Error!
DISC CANNOT BE RESTORED.
PLEASE RESTORE IT USING THE
RECORDED EQUIPMENT.
The inserted disc requires to be restored.
Eject the disc, and restore it or format it on another
XDCAM device.
XDROOT needs
Restoring.
DISC USERDATA XDROOT NEEDS TO
BE RESTORED.
An abnormality has occurred with the UserData
>XDROOT folder, and data restoration is needed.
Restore the XDROOT folder.
BPAV Error!
USERDATA BPAV ERROR.
You cannot use clips in the UserData >BPAV folder.
Alarm message in status
display area
Alarm message on video monitor
screen
Description/action
Unknown Media(A)
UNKNOWN MEDIA(A).
PLEASE CHANGE.
The inserted memory card has been partitioned, or it
contains more clips that the maximum that can be
handled by this unit.
Insert a memory card that has not been partitioned,
or one that contains fewer than the maximum number
of clips.
Memory (A) needs
Restoring.
MEDIA ERROR.
MEDIA(A) NEEDS TO BE RESTORED.
A memory card must be restored because an error
has occurred in the card.
Memory(A) Error!
MEDIA(A) CANNOT BE RESTORED.
PLEASE RESTORE IT USING THE
RECORDED EQUIPMENT.
An abnormality has occurred on the memory card,
and data restoration is needed.
Perform data restoration on the device that was used
to record to the memory card.
Alarm message in status
display area
Alarm message on video monitor
screen
Description/action
