98
Setup Menu
Chapt
er
7
Menu
s
713
VIDEO SETUP REFERENCE
b)
Set the video setup amount to be added to the composite output signal.
Sub-item
OUTPUT LEVEL In 59.94i/59.94P/
29.97P mode
(UC)
Add the setup level selected by this item to the output signal.
0.0
%,
7.5
%
In 59.94i/59.94P/
29.97P mode (J)
Add the setup level selected by this item to the output signal.
0.0
%,
7.5
%
715
VIDEO GAIN CONTROL
a)
Adjust the video output level of SD video signals output from the SDSDI
OUTPUT, COMPOSITE OUTPUT, or HDMI OUT connectors.
–
2048 to 0 to 848
716
CHROMA GAIN CONTROL
a)
Adjust the chroma output level of SD video signals output from the
SDSDI OUTPUT, COMPOSITE OUTPUT, or HDMI OUT connectors.
–
2048 to 0 to 848
717
CHROMA PHASE CONTROL
a)
Adjust the chroma phase of SD video signals output from the SDSDI
OUTPUT, COMPOSITE OUTPUT, or HDMI OUT connectors.
–
128 to 0 to 127
718
SETUP LEVEL (59.94i/59.94P/
29.97P mode)/BLACK LEVEL (50i/
50P/25P mode)
a)
Adjust the setup level (black level) of SD video signals output from the
SDSDI OUTPUT, COMPOSITE OUTPUT, or HDMI OUT connectors.
–
272 to 0 to 272
719
SYSTEM PHASE SYNC
a)
Adjust the sync phase of SD video signals output from the SDSDI
OUTPUT, COMPOSITE OUTPUT, or HDMI OUT connectors.
–
128 to 0 to 127
720
SYSTEM PHASE SC
a)
Adjust the subcarrier phase of SD video signals output from the SDSDI
OUTPUT, COMPOSITE OUTPUT, or HDMI OUT connectors.
0 to 511
723
INPUT VIDEO BLANK
a)
Switch blanking on or off for lines in the vertical blanking interval of input
video signals. Lines can be specified individually. Y/C signals and odd/
even fields are blanked simultaneously.
Blanking in recorded signals is carried out according to these settings.
Sub-item
1
ALL LINE
---:
Specify the blanking for each line separately
blank [blnk]:
Regardless of the settings of other sub-items, blank all
lines which can be specified in this menu item.
throu [thru]:
Regardless of the settings of other sub-items, switch
blanking off for all lines which can be specified in this menu item.
2
|
10
LINE12-
LINE20
In 59.94i/59.94P/
29.97P mode
Specify blanking for lines 12 to 20.
blank [blnk]:
Switch blanking on.
throu [thru]:
Switch blanking off.
2
|
15
LINE9, 322-
LINE22, 335
In 50i/50P/25P
mode
Specify blanking for lines 9, 322 to 22, 335.
blank [blnk]:
Switch blanking on.
throu [thru]:
Switch blanking off.
726
H BLANKING WIDTH
a)
Select the horizontal blanking width of the output analog video signal.
narrow [narow]
: Digital blanking (narrow)
wide
: Analog blanking (wide)
When “wide” is selected, the horizontal blanking width complies with
SMPTE-170M, and normally the blanking is widened and the image
becomes narrower. It is recommended to select “narrow” at the editing
stage, then later, for broadcast transmission to select “wide”, to output a
signal conforming to the standard. Note, however, that “narrow” has to
be always selected for SDI signals.
728
OUTPUT SCH PHASE
a)
Set the subcarrier H phase.
–512 to 0 to 511
Menu items in the 700s, relating to video control
Item number
Item name
Settings
