Sony PDW-HD1550, Руководство по эксплуатации

Страница: 57 / 136

57
Copying
Cha
p
te
r 4
Re
c
o
rdin
g, Pl
ay
bac
k
a
nd Copy
6
Press the START function button (F5).
Copying of the clips starts.
The progress of the copying is shown on the Clip Copy
screen, and the copy icon lights in the status display
area.
To abort the copy operation
Press the ABORT function button (F1), and then press
the YES (F5) function button.
The data already transferred to the destination media
remains on that media.
If the copy operation is completed successfully, the
message “Copy was successful.” appears.
7
Press the OK function button (F5).
The Clip Copy screen disappears, and you return to the
original screen.
To copy an EDL file
An EDL can be copied by an operation similar to a clip
copy operation. However, it is necessary to make a copy of
all clips referenced by the EDL in advance. Therefore,
“ALL” is automatically selected in step
3 of the procedure
for “Copying clips” (page 56) .
To copy the specified part of a clip
When you set an IN and OUT point in the clip, it becomes
possible to copy only the part defined by the IN and OUT
points.
1
On the video monitor screen, cue the clip up to the
frame where you want set an IN point.
2
Press the PUSH SET knob while holding down the
B /IN button.
An IN/OUT setting window appears in the bottom
right corner of the display.
The IN point timecode is displayed in the IN/OUT
setting window, and the IN indicator lights.
3
Cue up to the frame where you want to set an OUT
point.
4
Press the PUSH SET knob while holding down the
b /OUT button.
An IN/OUT setting window appears in the bottom
right corner of the display.
The OUT point timecode and the duration (DUR) are
displayed in the IN/OUT setting window, and the OUT
indicator lights.
5
Carry out step 4 and follow the procedure in “Copying
clips” (page 56) .
To check the clip with IN and OUT points set
1
Press the
B
/IN or
b
/OUT button.
An IN/OUT setting window appears in the lower right
of the display.
2
Press the NEXT or PREV button.
The unit cues up the frame with the IN (or OUT) point
set.
To delete the IN/OUT points
1
Press the
B
/IN button (or
b
/OUT button).
The IN/OUT setting window appears in the bottom
right corner of the display.
2
Press the RESET button.
The IN (or OUT) indicator turns off.
The following operations delete the IN/OUT points
automatically.
• Change the selection of media.
• Remove the media.
Note
IN indicator
OUT indicator