120
Troubleshooting
A
ppen
dix
Alarms relating to audio and video signals
Alarms relating to sensors and drivers
Other alarms
Alarm message in status
display area
Alarm message on video monitor
screen
Description/action
No INPUT!
INPUT VIDEO IS NOT DETECTED.
CHECK THE VIDEO INPUT MODE AND
SUPPLY A VIDEO SIGNAL TO VIDEO
INPUT.
• Check the setting of V INPUT on page P1 INPUT of
the function menu
• Input an HDSDI signal.
EMPHASIS!
INPUT AUDIO EMPHASIS IS NOT
SUPPORTED.
CHECK THE EMPHASIS OF THE AUDIO
INPUT SIGNAL.
Check the emphasis of the audio input signal.
REF Not Exist
–
Input a reference signal.
REF NON-STD
A NON-STANDARD REF SIGNAL IS
BEING USED FOR REF VIDEO.
USE A STANDARD SIGNAL.
Input a standard reference signal.
Alarm message in status
display area
Alarm message on video monitor
screen
Description/action
MEM-138 Warning
IT IS NESSESARY TO REPLACE MEM-
138.
PLEASE CONTACT SERVICE.
Contact your Sony representative.
Note
The unit will not stop operating, but if you continue to
use it in this state, it may fail, resulting in a total loss of
the information.
FAN(1/2/3) Error
FAN1(1/2/3) ERROR.
Contact your Sony representative.
Note
The unit will not stop operating, but if you continue to
use it in this state, temperatures inside the unit will
rise, possibly resulting in failure or fire.
FAN1 Warning
FAN1 WARNING.
DR-FAN Stop
DRIVE FAN MOTOR STOPPED.
High TEMP!
HIGH TEMPERATURE IN DRIVE.
HIGH TEMPERATURE.
LASER 0 Lifetime
DISC DRIVE LASER 0 LIFETIME HAS
ENDED.
PLEASE CONTACT SERVICE.
The lifetime of the Professional Disc drive laser has
come to an end.
Contact your Sony service or sales representative.
Alarm message in status
display area
Alarm message on video monitor
screen
Description/action
Turn off/on POWER!!
SYSTEM CONFIGURATION WAS
CHANGED.
PLEASE TURN OFF/ON POWER.
The system frequency was changed.
Power off this unit and then power it on again.
Turn off/on POWER!!
MENU CONFIG WAS CHANGED.
PLEASE TURN OFF/ON POWER.
Menu settings were changed.
To apply menu settings, power this unit off and then
power it on again.
Completed only XML file
–
Only the metadata file was updated, without updating
the metadata in the MXF file.
Format Media is
Prohibited.
Confirm Mainte Menu :
M395.
–
An attempt was made to execute Format Media while
use of the Format Media command is prohibited by
maintenance menu item M395.
Check maintenance menu item M395.
Cannot finalize this Disc.
It is available for QL-WO
disc only.
–
An attempt has been made to finalize a disc that
cannot be finalized.
Only quad-layer discs can be finalized.
