74
Disc Operations
Chapt
er 5 O
p
e
rat
ion
s
on
Clip
L
is
t Sc
ree
n
s
To finalize another disc
Remove the disc that has been finalized, and insert
another disc into the disc slot. When the confirmation
message appears asking if you want to execute
finalizing, execute step
5
once more.
6
To quit finalizing, select “Exit” and press the PUSH
SET knob.
Repairing discs
If a disc is not recognized correctly, you can repair the disc
for use by rebuilding the disc management data.
The repair operation can also be executed on normal discs
without problem.
This function is provided in order to recover recorded
material from discs in cases of unforeseen trouble, but it
does not represent a 100% guarantee of data recovery.
1
Insert the disc you want to repair into the disc slot.
2
Switch the display to the clip list screen.
The clip list may not be displayed if there is an error
with the disc.
3
Press the MENU button to display the Clip Menu.
4
Select “Update/Restorings Media” and press the
PUSH SET knob.
A confirmation message appears asking you whether
to execute repairing.
5
To execute repairing, select “OK” and press the PUSH
SET knob.
The repairing starts, and the message “Update/Restore
Executing...” appears.
The repair process cannot be interrupted.
When the repairing is completed, the message
“Update/Restore was successful.” appears.
To repair another disc
Remove the disc that has been repaired, and insert
another disc into the disc slot. When the confirmation
message appears asking if you want to execute
repairing, execute step
5
once more.
6
To quit repairing, select “Exit” and press the PUSH
SET knob.
Note