Sony PDW-HD1550 Скачать руководство пользователя страница 119

Страница: 119 / 136

119

Troubleshooting

ppe

ndix

Set Appropriate IN/OUT
Points.

The settings of IN and OUT points for partial copy operation are invalid.
Check the IN and OUT point settings.

No Clip!

The clip selected for expansion or chapter display has been deleted. Alternatively, the disc has
been ejected.

Cannot Expand Clip any
Further.

The selected clip cannot be divided any further to display the expanded thumbnails.
This alarm appears when the expanded thumbnails of a clip divided into the maximum number of
blocks are displayed or when the EXPAND function button has been pressed with the expanded
thumbnail screen displayed in which the duration of each block is one frame.

Delete is Prohibited.
This Clip is in Use.

The target clip is being used, so it cannot be deleted.

Delete is Prohibited.
Referring EDL is in Use.

The EDL which refers to the target clip is being used, so the clip cannot be deleted.

Delete is Prohibited.

Deletion of the target clip has failed.

Lock/Unlock is Prohibited.
This Clip is in Use.

The target clip is being used, so it cannot be locked/unlocked.

Lock/Unlock is Prohibited.

Locking/unlocking of the target clip has failed.

Set Clip Flag was not
Performed.

Set Clip Flag function has failed.

One Clip is being
Recorded.
Use Single Selection.

One of the selected clips was being recorded.
To copy a clip which is being recorded, make a single selection of the clip.

Operation is not
Supported for EDL.

You cannot select EDL to delete an essence mark or set a shot mark.

Operation is not
Supported for this Folder.

You cannot delete or lock/unlock any clip in the UserData >BPAV folder.

Adding EM was not
Performed.

Essence mark setting has failed.

Over DUR!

A clip with a duration that exceeds six hours cannot be copied.

Copy to /Clip is not
Permitted.
Change Dest to
/UserData.

The selected clip cannot be copied to the Clip folder.
Change the copy destination to the UserData folder.

Dest was Changed to
/UserData.
Copy to /Clip is not
Permitted.

The selected clip was not permitted to be copied to the Clip folder, so it was copied to the UserData
folder.

Cannot Display Chapter of
this Clip.

Display of the selected clip on the chapter thumbnail screen has failed.
Stop recording of a clip if any in progress.

Chapter was Changed.
Display Again.

The chapter setting information has been updated.
Try again the chapter thumbnail display.

Disc Busy!

The Professional Disc was being used, so copying was not possible.

Chapter does not Exist.

Chapter thumbnail screen cannot be displayed because no chapters are set on the clip.

Cannot Expand this Clip.

The clip cannot be expanded because it is being recorded.

Unable to Parse the EDL.

The EDL cannot be copied due to the existence of an inhibiting condition, such as a missing sub
clip.

Writing this AV Format to
DISC is not Permitted.

This clip cannot be copied to the currently loaded Professional Disc because of its format.

Out of Remain Space!

The remaining capacity of the copy destination media is not sufficient.

Alarm message on clip
list screen

Description/action

Содержание PDW-HD1550









































































































































Результаты поиска

Содержание PDW-HD1550

Отзывы:

Похожие инструкции для PDW-HD1550

Бренды по названию

Популярные бренды

Sony PDW-HD1550, Руководство по эксплуатации

Результаты поиска

Содержание PDW-HD1550

Отзывы:

Похожие инструкции для PDW-HD1550

Бренды по названию

Популярные бренды