88
Setup Menu
Chapt
er
7
Menu
s
a) Not displayed when the unit is in 23.98P mode.
b) Not displayed when the unit is in 59.94P/50P mode.
028
HD CHARACTER
Specify whether to superimpose text information on the HD video signal.
Sub-item
1
HD-SDI2
Specify whether to superimpose text information on the video signal output
from the HDSDI OUTPUT 2 (SUPER) connector.
off:
Do not superimpose.
on:
Superimpose.
2
HDMI
a)
Specify whether to superimpose text information on the video signal output
from the HDMI OUT connector when the HDMI output is the same with the SDI
output.
off:
Do not superimpose.
on:
Superimpose.
029
STORED OWNERSHIP
Specify whether to enable changing UMID ownership information settings
(COUNTRY, ORGANIZATION and USER).
off:
Do not enable.
on:
Enable.
See “Using UMID Data” (page 126) for more information about UMID.
031
RECORDING FORMAT
Set the recording format.
AI422:
XAVC Intra 1920×1080 422
b)
HD422:
HD422
HD420 HQ [420HQ]:
HD420 HQ
HD420 SP [420SP]:
HD420 SP
a), b)
IMX 50Mbps [IMX50]:
MPEG IMX 50 Mbps
a)
IMX 30Mbps [IMX30]:
MPEG IMX 30 Mbps
a)
DVCAM:
DVCAM
a)
033
BATTERY END VOLTAGE
Set the voltage at which to shut down the unit during battery operation. The
battery near end indicator flashes at +0.7 V of the set voltage.
10.5V to 13.5V:
10.5 V to 13.5 V in 0.5 V unit.
036
FILE NAMING
Set the clip name to be assigned to a clip to record.
Sub-item
1
PREFIX
Set the prefix of the clip name (up to 10 characters). The allowable characters
are alphanumeric characters, symbols (! # $ % & ' ( ) + , - . ; = @ [ ] ^ _ { } ~),
and the space character.
CLIP
2
NUMERIC
Set the initial value of the numeric part (00001 to 99999, five-digit serial
number) of the clip name.
00001
3
AUTO NAMING
Specify the clip naming format.
prefix:
Generate clip names using PREFIX and NUMERIC.
C****:
Generate names in PDW-series standard format. (****: numeric portion)
(File names become C****.MXF with numeric portion in ascending order.)
B01
RECALL SETUP BANK-1
Set to “on” to recall menu bank 1 to replace the current menu settings.
B02
RECALL SETUP BANK-2
Set to “on” to recall menu bank 2 to replace the current menu settings.
B03
RECALL SETUP BANK-3
Set to “on” to recall menu bank 3 to replace the current menu settings.
B11
SAVE SETUP BANK-1
Set to “on” to save current menu settings to menu bank 1.
B12
SAVE SETUP BANK-2
Set to “on” to save current menu settings to menu bank 2.
B13
SAVE SETUP BANK-3
Set to “on” to save current menu settings to menu bank 3.
B20
RESET SETUP MENU
Set to “on” to return the settings of the current menu to the factory default
settings.
Item number
Item name
Settings
