Sony PCS-3000, Руководство по эксплуатации

Страница: 20 / 123

1-12
Chapter 1 Using the Basic System
Chapter 1
Adjusting Local and Remote Cameras
You can adjust the local camera to obtain the best viewing results.
You can also adjust the remote camera and adjust the image being sent
from that camera.
Notes
• You cannot control a remote camera when it is on line to several parties
at once. See “Holding a Meeting With Multiple Remote Parties” on page
1-19.
• A malfunction may occur if the local and remote parties try to adjust the
same camera at the same time.
• You cannot control a remote camera during meeting if the remote party is
using other than a PCS-5000/4000/3000/2000 series system and H.281 is
not selected as the remote camera control system.
To select the camera to adjust
In order to adjust a camera, you must select which camera you want to
control – local or remote. Selection and adjustment can be done in the
CAMERA or QUICK menu.
The following describes selection and adjustment from the QUICK menu:
Note
Focus, preset settings, and AT (automatic target tracking) function can be
set only from the CAMERA menu.
1
Select the camera (local or remote) you want to adjust with the FAR
END icon.
Each time you select [FAR END], the color of the icon is switched
between gray and blue.
While the icon is gray, you can operate the local camera.
While the icon is blue, you can operate the remote camera.
(You cannot control a remote camera during meeting if the remote
party is using other than a PCS-5000/4000/3000/2000 series system
and H.281 is not selected as the remote camera control system.)
2
Adjust the camera.
You can adjust the camera angle and zoom, and recall the camera
angle and zoom settings from the QUICK menu.
For details, see “To adjust the camera angle and zoom” on next page.
Basic Adjustments
[FAR END]
MAIN
MENU
FAR
END
SYSTEM
OFF
P in P
OBJECT
F A B C D E
PRESET