110
Timer recording is not complete or did not start
from the beginning.
,
There was a power failure during recording. If
the power recovers when there is a timer
recording, the recorder resumes recording.
Should the power failure continue for more than
1 hour, reset the clock (page 94).
,
Another timer setting overlapped the timer
setting (page 56).
,
Disc space was not enough.
,
The PDC/VPS function is working.
Contents previously recorded were erased.
,
Data that has been recorded on a DVD with a PC
will be erased from the disc when the disc is
inserted.
,
“Auto Title Erase” in the TOOLS menu (appears
when you press TOOLS while the Timer List
menu is turned on) is set to “On” (page 57).
,
The title was updated and recorded over
(page 50).
The PDC/VPS function does not operate.
,
Check that the clock and date are set correctly.
,
Check that the PDC/VPS time you set is the
correct one (there might be a mistake in the TV
programme guide). If the broadcast you wanted
to record did not send the correct PDC/VPS
information, the recorder will not start recording.
,
If the reception is poor, the PDC/VPS signal
might be altered and the recorder might not start
recording.
,
“PDC/VPS Scan Off” is selected (page 51).
Recording from equipment with a
timer
Nothing was recorded even though you set the
Synchro-Rec setting correctly.
,
You forgot to turn off the connected equipment.
Turn off the connected equipment and set the
recorder to Synchro-Rec standby mode
(page 57).
,
The recorder was not set to the Synchro-
Recording standby mode. Press SYNCHRO
REC to have the recorder stand by for recording.
Make sure the SYNCHRO REC indicator lights
up on the front panel (page 57).
,
The recorder is connected to the TV output jack
of the connected equipment.
Synchro-Recording does not complete.
,
The timer setting for the connected equipment
overlapped the recorder’s timer setting
(page 58).
,
There was a power failure during the recording.
The recorder automatically starts recording
when the satellite receiver is turned on.
,
The Synchro-Rec function was activated. Turn
off the satellite receiver and cancel the Synchro-
Rec function (page 57).
Display
The clock has stopped.
,
Set the clock again (page 94).
,
The clock stopped due to a power failure that
lasted for more than 1 hour. Reset the clock
(page 94).
The TIMER REC indicator is flashing.
,
The disc does not have enough space.
,
Insert a recordable disc inside the recorder.
The recording mode indication is incorrect.
,
When the recording or dubbing is less than three
minutes, the recording mode indication may be
displayed incorrectly. The actual recording itself
is correctly made in the selected recording mode.
,
After playing titles recorded in SLP and SEP
mode, the recording mode indication may
change depending on the recorded programme.
