32
Before Using the Handset
S
O-01D_English
1
Remove the back cover, put your
tip of thumb (nail) under the
battery pack from the groove of the
terminal, hold the battery pack up
in the direction of the arrow (
) to
remove.
1
Insert the supplied microU
S
B
cable horizontally with the
microU
S
B plug
engraved side
facing up into the connector for
U
S
B cable of the terminal.
2
Insert the microU
S
B cable
horizontally with the U
S
B plug
engraved side facing up into the
connector for U
S
B of the AC
Adapter, and insert the AC Adapter
plug to the power outlet.
3
When the charging is completed,
remove the microU
S
B plug of the
microU
S
B cable from the terminal.
4
Remove the AC Adapter from the
power outlet.
❖
Note
・
If the microUSB cable is connected into the
connector for external devices for charging etc,
the terminal is automatically powered on. Be
careful not to connect the microUSB cable in a
place where the use is prohibited such as in
airplane or hospital.
1
Insert the microU
S
B cable
horizontally with the microU
S
B
plug
engraved side facing up
into the connector for U
S
B cable of
the terminal.
Removing the battery pack
Charging with the AC Adapter
Groove
Charging with a PC
Continued on next page
SO-01D_(E).book 32 ページ 2011年10月20日 木曜日 午後1時6分